doors

1. Wood Doors

Change the interior doors
to matching wooden doors. There are a large variety of wooden doors now available especially oak doors. There is a full range of veneered oak doors, walnut doors, cherry, beech, pine, pitch pine and white doors – almost any colour to match any wooden floor.

Bespoke doors are also available however these are more costly due to the individual manufacturing processes. The doors can complement a wood floor perfectly and come in a variety of finishes. A large number of oak doors are unfinished when purchased so they can be sealed to match the floor with either an oil or varnish – they can even be colour oiled to blend with a similar colour oiled floor. Oils are the most common finish for doors however varnish / lacquer is adequate. The majority of doors are veneered hardwood for both conservation and stability however there are a small number of solid wood doors available.

Most doors have an identical style in half hour rated fire doors which will pass all building regulations where 30 minute fire doors are required. A new line of supermodel doors also contain glazed fire doors which enable more flexibility with style and design. External doors also come in various timbers – usually veneered again for stability due to the high exposure to cold, heat and moisture. A new front door is a perfect finish to the front of your house.

Wood doors range in style from Victorian style, 1930s style to the modern and contemporary – there is a door style to suit all tastes, colours and styles.

1. Skirting, Architrave and Door casings

The best way to complement a new wood door is to accessorise with the matching door frame, architrave and skirting. There is a large range of door casings, architraves and skirtings available to complement the wood flooring and doors you have chosen in many styles and timbers.

The most popular is the oak – there are both engineered and solid door casings. There is very little difference between the solid and engineered casings however joiners will often specify the types preferred or there will be a preference due to location (ie. In below ground applications) There are two types of door casings – rebated door casings and door linings which come with a loose stop. They are both suitable for all types of doors however where a fire rated door casing is required there are ready made door casings with the intumescent strip for the building regulations.

Architraves also come in both solid and engineered timber. Sizes vary from approx 45mm – 90mm or wider depending on the application. A standard size is usually around 57mm for most houses dating from 1900’s. The style of architrave varies and matches most skirting board profiles. It is also possible to have architrave blocks – small squares on the corners – an older design now becoming popular once again. Styles of architrave include original designs such as torus, ogee and lambs tongue, plus other more contemporary styles such as pencil round (bullnose), chamfered and square edged.

Architraves are available unfinished, prefinished with oil, lacquer / varnish or colour oiled to match the flooring or doors .

Skirtings can make your new floor look completely finished – they enhance the hardwood floors giving clean lines around the edges of the room – the floors look like they have been part of the home for some time. Once again, oak skirting is the most popular timber to blend with the oak floors.

Engineered and solid skirtings are available in numerous sizes. The engineered skirtings are veneered with a top layer of real wood and give the option of more types of timber such as walnut which is very rare in a solid skirting but more widely available in a veneer.

The standard sizes of skirtings range from 95mm to 220mm however the most popular ones are between 95 and 140mm. Often you will be guided by the size of skirting previously fitted as sockets and plaster will dictate the height. Styles of skirting match all the architrave styles – original designs like torus, ogee and lambs tongue along with contemporary designs such as square edge, bullnose (pencil round) and chamfered.

Skirtings are available unfinished, prefinished with oil, lacquer / varnish or colour oiled to match the flooring or doors. Oak skirtings have often been used to complement light coloured carpets as well as oak flooring to break up the room between light floors and light walls – this is often done in bedrooms where people often want the comfort of carpet but with a hint of wood.

Window boards in the same timber as your floor will brighten up any window and make them look like new – as with the skirting, doors and architrave – the most popular ones are oak. The window boards can come in the original bullnose edging or with a square edge for a contemporary look.

The sizes of the window boards are available between 100mm – 350mm in both a solid board or veneered oak MDF board. The window sills are available unfinished or prefinished in a lacquer / varnish, oil or colour oil to complement the room.

These boards can also be used as stair cladding to clad over an existing staircase. The bullnose is perfect for the tread of the stair and square edge can be used for the riser – no need to rout out the existing overhang as the stairs can be packed first for the cladding to go over. A perfect accompaniment for all wooden floors.